Sign In | Join Free | My burrillandco.com
Home > IEC Test Equipment >

5rpm Tumbling Barrel Tester

    Buy cheap 5rpm Tumbling Barrel Tester from wholesalers
     
    Buy cheap 5rpm Tumbling Barrel Tester from wholesalers
    • Buy cheap 5rpm Tumbling Barrel Tester from wholesalers
    • Buy cheap 5rpm Tumbling Barrel Tester from wholesalers
    • Buy cheap 5rpm Tumbling Barrel Tester from wholesalers

    5rpm Tumbling Barrel Tester

    Ask Lasest Price
    Brand Name : HeJin
    Model Number : HC9922A
    Certification : calibration certificate (cost additional)
    Price : Negotiatable
    Payment Terms : L/C, T/T
    Supply Ability : 20 set /month
    Delivery Time : 20 days
    • Product Details
    • Company Profile

    5rpm Tumbling Barrel Tester

    IEC Test Equipment Tumbling For Barrel Testing Machine With Rotate Speed Of 5rpm


    Standard:

    IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 24.2.

    IEC 60598-1‘Luminaires - Part 1: General requirements and tests’ clause 4.13.6

    IEC 60998-1‘Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements’ .

    IEC 60068-2-31‘Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens’.

    IEC 60312-1 ‘Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance’.


    Standard description of IEC60598-1:

    Plug-ballast/transformers and mains socket-outlet-mounted luminaires shall have adequate mechanical strength.

    Compliance is checked by the following test, which is made in a tumbling barrel as shown in Figure 25.

    The barrel is turned at a rate of five revolutions per minute, ten falls per minute thus taking place.

    The sample falls from a height of 50 cm onto a steel plate 3 mm thick, the number of falls being:

    – 50 if the mass of the sample does not exceed 250 g;

    – 25 if the mass of the sample exceeds 250 g.

    After the test, the sample shall show no damage within the sense of this standard, but it need not be operative and any damage to the glass bulb shall be ignored. Provided that the protection against electric shock is not affected, small pieces which may have broken off the sample are ignored.


    Application:

    This device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories.IEC Test Equipment


    Test sample:

    plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other electrical accessories.


    Feature:

    This tester can preset test times, automatic stop when set test times completed. IEC Test Equipment


    Parameters:

    ModelHC9922HC9922AHC9922BHC9922C
    Rotate speed5rpm5rpm5rpm5rpm
    Drop rate10time per min10time per min10time per min10time per min
    MaterialSideways 1.5mm high-quality steel plate, upper and lower for 3mm steel pad in the 10-19mm wood and oblique part slide surface is plastic laminate, with triangle rubber pad3mm steelFront and rear are the transparent plastic sheet, the up, down, left and right are with thickness of 10~19mm plywood5 mm steel and 20mm hard wooden plate
    Test times0~99990~99990~99990~9999
    Drop height500mm (1000mm for option)500mm500mm800mm
    Barrel numberSingle or doubleSingle barrelSingle barrelSingle or double
    ApplicationPlug and socket and similar electrical accessoriesPlug type lamp ballast / transformer and power socket install luminaries, plug deviceBS plug and socket-outsHousehold vacuum cleaners and similar electrical appliances
    StandardsIEC60884.1, IEC60068-2-31, EN50075IEC60598-1 figure25, VDE0620-1 figure27

    BS1363.1 Figure20,

    UL60730

    IEC60312-1
    Power supply220V 50Hz220V 50Hz220V 50Hz220V 50Hz

    5rpm Tumbling Barrel Tester


    5rpm Tumbling Barrel Tester

    Quality 5rpm Tumbling Barrel Tester for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
    *Subject:
    *Message:
    Characters Remaining: (0/3000)